350ar Movable Argon Surgical Gengerator Trolly Argon Plasma Electrosurgical Unit Price

• Customization: Available
• Type: Surgical Equipment
• Kind: Surgical Equipment
• Model NO.: UMCM350Ar
• Certification: CE, ISO13485
• Group: Adult
• Application: Hospital, Clinics, Beauty Agency, etc
• Properties: Gynecological Examination
• Product: Electrosurgical Unit
• Atmospheric Pressure Range: 86.0~106.0kpa
• Operating Freq.: 416kHz
• Transport Package: Carton
• Specification: standard parking
• Trademark: UMY
• Origin: Guangzhou
• HS Code: 9018909911
• Production Capacity: 50000PCS/Month

Product Description

Product Description

High Quality Frequency Medical Electric Accuracy CM-350 Electrosurgical Unit

Type:  

The output of the machine is fully suspended. It has two independent and isolated type CF anti-defibrillation applications (monopolar and bipolar), non-AP,non-APG type common equipment, 110V-220V (+10%) power supply.

Function:  

The 416KHz(+10kHz) high frequency current generated by this argon plasma diathermy machine can performs cut and coagulation for biological tissues.

It integrates cutting, coagulation and AIC argon technology.

It has seven working modes: Cut: Pure cut, Blend 1, Blend 2; Monopolar coagulation: Spray Coagulation, Soft Coagulation, Argon beam coagulation; and Bipolar coagulation.

General Description:

UMY CM-350 Ar and its special probes offers fundamental advantages over conventional coagulation methods.

The Argon Plasma beam permits non-contact coagulation of tissue, homeostasis of large surface bleeding can be stopped effectively and safely. And penetration depth is lesser than 3mm, no lead to carbonization.

Features:

*A broad spectrum of applicators in open surgery and for endoscopy

*Non-contact application, with no adhesion between applicator and tissue, and good visibility of the coagulation process.

*Uniformly effective, wide-area hemostasis and coagulation.

*Limited penetration depth, so that application in areas at risk of perforation is superior to all other coagulation methods.

Application:

It is applicable to ESD, EMR, ERCP, POEM, polypectomy, polyp burning, gynecology, orthopedics and surgery.

Rated output power:

*Pure cut:1W~300W (load 500 Ω);

A high-frequency alternating current yields smooth, rapid cuts that evoke little to know hemostasis.

*Blend cut 1:1W~200W (load 500 Ω);

Preset blended cut modes give the surgeon varying degrees of hemostasis in cut mode.

*Blend cut 2: 1W~150W (load 500 Ω);

The mode is used for vaporization of prostatic tissue or any fat tissue. The higher output wattage gives fast cutting effect of the tissue.

*ENDO CUT

The mode is used to automatically controlled cut system to reduce the complication rate of endoscopic sphincterotomy (EST) and serum hyperamylasemia after EST compared to the conventional blended cut mode.

*Spray coagulation:1W~80W (load 500 Ω);

Spray output is made for direct coagulation at the tissue with spark. above spark does not give any cutting effect as its CREST FACTOR is high.

*DESICATE coagulation:1W~120W (load 500 Ω);

Coagulation in which the active electrode is in direct contact with the tissue is referred to as desiccation and is the type of coagulation used in most surgeries it ensures pinpoint desiccation with less destruction of peripheral tissue.

*Bipolar coagulation (Optional):1W~70W (load 100 Ω); 

For highly precise control over coagulation process and privations of carbonization.

 Argon:Dual Argon airflow adjustment, accuracy: 0.1 L/min; Argon pressure range: 0.20 ~ 0.50Mpa, Automatic compensation function stabilize output power, make depletion to its lowest.

Specification

Output Flow Indication	0.1L/min ~ 5L/min (Optional 0.1L/min ~ 10 L/min or Max. 12 L/min)
Step Distance of Flow Control	Varied step distance choices: 0.1L/min (0.1~2.0L/min); 0.5L/min (2.0-5.0L/min);
Security Check	Power on self-test of hardware units and alarm system
Working Gas	99.99% purity medical argon
Argon Supply	Support direct connection to the 40L type argon cylinder from hospital
Cylinder Capacity	4L
Scope Pressure Monitoring	An environment pressure monitoring system, which automatically stops the match and gives an alarm once the pressure is above-threshold in endoscopy
Friendly Interface for Instruments	Each Instruments with its own independent interface to prevent misconnection
Argon Independent output control Function	Only under “spray coagulation” mode and press argon output switch, can it start to work; It prevents the electrode from being burned and the normal tissue from being hurt in case of miss operation of the switch in gastrointestinal endoscopy
ENDO CUT Function	It combines the APC and Electrosurgery, which cut polypus and coagulate bleeding at the same time.
Type	CF
Security Level	I
Input voltage	220v~240v
Frequency of Electric Power	50/60Hz

Company Profile

ABOUT US

UMY Medical Headquartered in Guangzhou,  which is a professional medical x-ray  manufacturer which integrates research and  development with production and supplier of  various medical equipment. 

UMY Medical covers the business of medical imaging, medical laboratory, OT equipment,  gyn & obstetrics equipment, dental supplies, ENT device, hospital furniture, CSSD solutions,  and other medical equipment. Based on mutual trust & good service, our mission is to  provide the most cost-effective medical equipment for hospitals and clinics around the  world. So far, we have established good cooperation with customers from 188 countries or  areas globally. 

UMY Medical insists on the idea of "Reputation First, Customers Foremost", which is the aim  of our after-sale service. We have established a good after-sale service team, providing  powerful backup force to our customers.

Our Advantages & CERTIFICATE

SKU	Over 5,000
Medical Industry experience	Over 26 Year
Stock in Stock	YES
Export customers	Over 1,000

Packaging & Shipping

FAQ

1. What is the MOQ?
Re: Any quantity is available.

2. Where to use?
Re: Clinic, hospital,community inspection,battlefield,university,laboratory,government tender,distributors...

3. Can you provide other power?
Re: Yes,we have different power for your selection.

4. Do you have floor-mounted or mobile for selections?

Re: Yes.we have both floor mounted and mobile.

5. What is your production time?
Re: Our production time is normally around 15 days for 1~5 sets quantity.

6. How can we guarantee quality?
Re: Always a pre-production sample before mass production;Always final Inspection before shipment.

7. What can you buy from us?
Re: IVD equipment,Medical accessories,POCT,Ultrasonic equipment,Radiation Equipment and so on.